Carol Enterprise Corp. Ltd -

Carol Enterprise Corp. Ltd

Showing 1 - 10 of 15, total 2 pages [First] [Previous] [Next] [Last]

stainless tape or profile tape
Specification: 0
Detail: Material: 304 / 316L / 321 Stainless tape width: 2.6mm / 2.9mm /3.2mm / 3.8mm Profile: V or W Profile tape width: 2.3mm / 2.5mm / 2.8mm / 3.2mm / 4.5mm / 6.5mm

mechanical seals
Specification: 0
Detail: Profile Standards unbalanced mechanical seal with various kinds of material and face combination which is in conformity with DIN 24960, ISO 3069, GB6556 standards, typically used in process pumps in order to meet the requirem...

asbestos rubber sheets
Specification: 0
Detail: Material: Made of asbestos fiber, rubber and heat-resisting packing material, compressing it to thick paper . Uses: Used for the equipment in water, steam, etc. and used as sealing material in the joints of pipeline. Wor...

fiberglass mesh
Specification: 0
Detail: (Recommended application) : Reinforcing GRC products, preventing wall crack, floor heat supplying system. Alkaline-resistant fiberglass mesh is woven by C- fiberglass yarn as its basis fabric, then coated by alkaline r...

expanded ptfe seal
Specification: 0
Detail: PTFE is a good flexibility with the sealing material. It is made of pure PTFE dispersion resin through the layering, stretching from high temperature, it has a low coefficient of friction, resistance, chemical corrosion, go...

acrylic packing
Specification: 0
Detail: Material: acrylic fiber Performance characteristics: high-performance high-strength polyacrylonitrile composite textile line, pre-impregnated PTFE PTFE emulsion, the process of weaving in the square once again shallow col...

grinding machine
Specification: 0
Detail: With standard accessories: Grinding wheel (¡Ó125 x ¡Ó25.4 x 20t) x 1pc Grinding wheel flange x 1pc Flange ***cer (Thick, Thin) x 1pc/each Flange remover x 1pc Tool box and Accessories x 1set Working lamp x 1set 3-Jaw wr...

air polisher
Specification: 0
Detail: Pad size: 3", 4.5", 5.5" Speed: 18,000rpm Air consumption: 2.5 cfm Spindle Thread: 5/8"-11T Air Inlet: 1/4" Weight: 2.64 lbs/1.2kg Length: 4.93"/125mm

drills
Specification: 0
Detail: Free speed: 700 rpm Air Consumption: 2.30 CFM Speed Reducer: Double Caged Housing: Alum Angle: 90 degree Exhaust: Handle Length: 205mm/8.10 in Weight: 1.40 kgs / 3.200 lbs Air pressure: 90 psi Air Inlet: 1/4"

screwdriver
Specification: 0
Detail: Free Speed: 10000 rpm Air Consumption: 2.30 CFM Max Torque: 35ft-lbs / 47N-m Capacity of Tearing: M5-M6 Exhaust: Rear Length: 220mm/8.67 in Weight: 0.80kg / 1.76 lbs Air pressure: 90 psi Air Inlet: 1/4"


Showing 1 - 10 of 15, total 2 pages [First] [Previous] [Next] [Last]
1 2